Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method     

Omid Ghaffaripour  Golnaz A. Esgandani  Arman Khoshghalb  Babak Shahbodaghkhan 《国际地质力学数值与分析法杂志》2019,43(11):1919-1955

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.  相似文献   

基于圆柱多段拟合的隧道中轴线提取方法研究     

荆海峰  李广云  王力  杨文锋 《大地测量与地球动力学》2018,38(2):211-215

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。  相似文献   

一种由粗到精的地面激光点云多层级配准方法     

王英  张云生 《测绘与空间地理信息》2020,(2):156-159

提出了一种综合利用快速点特征直方图(FPFH)描述符和同名点引导ICP优化的地面激光扫描(TLS)点云配准方法。该方法包括3个步骤:1)点云金字塔构建;2)基于FPFH的粗配准;3)同名点引导的ICP精配准。首先使用体素网格滤波器构造点云的金字塔结构,在粗配准时,FPFH描述符用于金字塔顶层上点云的鲁棒匹配,在此基础上,再进行两层级同名点引导的ICP精配准优化,使用3组典型TLS点云对进行实验,结果表明本文方法可以高效地完成TLS点云的配准。  相似文献   

Fast genetic mapping in barley: case studies of cuticle mutants using RNA-sequencing     

XiaoFeng Li  Chao Li  Qin Zhou  GuoXiong Chen  PengShan Zhao 《寒旱区科学》2020,12(3):180-188

Barley(Hordeum vulgare L.) is one of the earliest domesticated crop species and ranked as the fourth largest cereal production worldwide. Forward genetic studies in barley have greatly advanced plant genetics during the last century; however, most genes are identified by the conventional mapping method. Array genotyping and exome-capture sequencing have also been successfully used to target the causal mutation in barley populations, but these techniques are not widely adopted because of associated costs and partly due to the huge genome size of barley. This review summarizes three mapping cases of barley cuticle mutants in our laboratory with the help of RNA-sequencing. The causal mutations have been successfully identified for two of them and the target genes are located in the pericentromeric regions. Detailed information on the mapping-by-sequencing, mapping-and-sequencing, and RNA-sequencing assisted linkage mapping are presented and some limitations and challenges on the mapping assisted by RNA sequencing are also discussed. The alternative and elegant methods presented in this review may greatly accelerate forward genetics of barley mapping, especially for laboratories without large funding.  相似文献   

基于SAR干涉点目标分析技术的城市地表形变监测   总被引：1，自引：0，他引：1  

张永红  张继贤  龚文瑜  LU Z 《测绘学报》2009,38(6)

通过深入研究干涉点目标的相位模型,提出基于空间搜索的邻近点目标干涉相位差解缠方法,用以计算点目标的地形残差和线性形变,以及分离点目标大气延迟相位和非线性形变相位的时空域滤波方法,解决干涉点目标分析中的关键问题.最后,以苏州地区地表沉降监测为应用试验,利用形成的SAR干涉点目标形变信息提取技术,获取苏州市区1992-2002年间的地表沉降信息.研究结果与已有文献记录保持比较好的一致性,证明SAR干涉点目标技术完全可以发展成为应用于城市地表形变监测的实用化技术.

Abstract：

Interferometric point target analysis (IPTA) is one of the latest developments in radar interferometric processing. It is achieved by analysis of the interferometric phases of some individual point targets, which are discrete and present temporarily stable backscattering characteristics, in long temporal series of interferometric SAR images. This paper analyzes the interferometric phase model of point targets, and then addresses two key issues within IPTA process. Firstly, a spatial searching method is proposed to unwrap the interferometric phase difference between two neighboring point targets. The height residual error and linear deformation rate of each point target can then be calculated, when a global reference point with known height correction and deformation history is chosen. Secondly, a spatial-temporal filtering scheme is proposed to further separate the atmosphere phase and nonlinear deformation phase from the residual interferometric phase. Finally, an experiment of the developed IPTA methodology is conducted over Suzhou urban area. Totally 38 ERS-1/2 SAR scenes are analyzed, and the deformation information over 3 546 point targets in the time span of 1992-2002 are generated. The IPTA-derivecl deformation shows very good agreement with the published result, which demonstrates that the IPTA technique can be developed into an operational tool to map the ground subsidence over urban area.  相似文献   

The SuperCOSMOS Sky Survey – III. Astrometry     

N.C. Hambly  A.C. Davenhall  M.J. Irwin  H.T. MacGillivray 《Monthly notices of the Royal Astronomical Society》2001,326(4):1315-1327

In this, the third in a series of three papers concerning the SuperCOSMOS Sky Survey, we describe the astrometric properties of the data base. We describe the algorithms employed in the derivation of the astrometric parameters of the data, and demonstrate their accuracies by comparison with external data sets using the first release of data, the South Galactic Cap survey. We show that the celestial coordinates, which are tied to the International Celestial Reference Frame via the Tycho–2 reference catalogue, are accurate to better than ±0.2 arcsec at J , R ∼19,18 , rising to ±0.3 arcsec at J , R ∼22,21 , with positional-dependent systematic effects from bright to faint magnitudes at the ∼0.1-arcsec level. The proper motion measurements are shown to be accurate to typically ±10 mas yr⁻¹ at J , R ∼19,18 , rising to ±50 mas yr⁻¹ at J , R ∼22,21 , and are tied to zero using the extragalactic reference frame. We show that the zero-point errors in the proper motions are ≤1 mas yr⁻¹ for R >17 , and are no larger than ∼10 mas yr⁻¹ for R <17 mas yr⁻¹ .  相似文献   

Parallax distortion by the weak microlensing effect     

M. V. Sazhin  V. E. Zharov  T. A. Kalinina 《Monthly notices of the Royal Astronomical Society》2001,323(4):952-964

Parallax measurements allow distances to celestial objects to be determined. Together with measurements of their position on the celestial sphere, they give a full three-dimensional picture of the location of the objects relative to the observer. The distortion of the parallax value of a distant source affected by weak microlensing is considered. This means that the weak microlensing leads to distortion of the distance scale. The gravitational deflection causes a retrograde apparent motion of the image, which is revealed as a negative parallax. It is shown that the distortions may significantly change the parallax values when they amount to several microseconds of arc. In particular, at this level many measured values of parallaxes should be negative.  相似文献   

Report of the International Astronomical Union Division I Working Group on Precession and the Ecliptic   总被引：1，自引：0，他引：1  

J. L. Hilton  N. Capitaine  J. Chapront  J. M. Ferrandiz  A. Fienga  T. Fukushima  J. Getino  P. Mathews  J.-L. Simon  M. Soffel  J. Vondrak  P. Wallace  J. Williams 《Celestial Mechanics and Dynamical Astronomy》2006,94(3):351-367

The IAU Working Group on Precession and the Equinox looked at several solutions for replacing the precession part of the IAU 2000A precession–nutation model, which is not consistent with dynamical theory. These comparisons show that the (Capitaine et al., Astron. Astrophys., 412, 2003a) precession theory, P03, is both consistent with dynamical theory and the solution most compatible with the IAU 2000A nutation model. Thus, the working group recommends the adoption of the P03 precession theory for use with the IAU 2000A nutation. The two greatest sources of uncertainty in the precession theory are the rate of change of the Earth’s dynamical flattening, ΔJ₂, and the precession rates (i.e. the constants of integration used in deriving the precession). The combined uncertainties limit the accuracy in the precession theory to approximately 2 mas cent⁻². Given that there are difficulties with the traditional angles used to parameterize the precession, z_A, ζ_A, and θ_A, the working group has decided that the choice of parameters should be left to the user. We provide a consistent set of parameters that may be used with either the traditional rotation matrix, or those rotation matrices described in (Capitaine et al., Astron. Astrophys., 412, 2003a) and (Fukushima Astron. J., 126, 2003). We recommend that the ecliptic pole be explicitly defined by the mean orbital angular momentum vector of the Earth–Moon barycenter in the Barycentric Celestial Reference System (BCRS), and explicitly state that this definition is being used to avoid confusion with previous definitions of the ecliptic. Finally, we recommend that the terms precession of the equator and precession of the ecliptic replace the terms lunisolar precession and planetary precession, respectively.  相似文献   

Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays     

Gert Finger  Reinhold J. Dorn  Alan W. Hoffman  Hamid Mehrgan  Manfred Meyer  Alan F. M. Moorwood  Joerg Stegmeier 《Experimental Astronomy》2002,14(2):117-127

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

未来的国际天球参考架     

金文敬  李东明  唐正宏  王叔和 《紫金山天文台台刊》2003,(1)

本文简述了国际天球参考架的发展历史和现在射电参考架的现状—基准源选择的标准和参考架的稳定性。描述了地面上光学观测在依巴谷参考架的维持和加密的一系列工作。介绍由天体测量卫星GAIA和SIM给出的天球参考架可能逵到的精度。详述了在今后十年中地面天体测量的作用以及正在开展有关天球参考架的研究课题 ,同时也列出了我国正在和即将开展天体测量的几个研究课题  相似文献